Lubricants

Our Marine DEF meets and exceeds industry specifications and standards, effectively increasing fuel efficiency and reducing nitrogen oxide (NOx) emissions into harmless water and gas. The use of Marine DEF effectively assists you in adhering to several regulations that require vessels to reduce their emissions, such as MARPOL. It is a 40.0 % (AUS 40) Aqueous Urea Solution produced with high-purity urea mixed with demineralized water and was formulated to meet the specifications of ISO 18611-1:2014

Our AUS 32 DEF transforms harmful nitrogen oxide (NOx) emissions from diesel powered vehicles into harmless water vapour and nitrogen. It is a 32.5% (AUS 32) Aqueous Urea Solution produced with high-purity urea mixed with demineralized water and was formulated to meet the specifications of ISO 22241- 1:2019.

Piprotherm PG Pre mixed 50 50 is a premium low temperature heat transfer fluid formulated with propylene glycol for use where low toxicity is required.

Universal Antifreeze Coolant is a traditional green colored antifreeze recommended for the cooling systems of older models of foreign and domestic passenger vehicles, light duty trucks, and SUVs This antifreeze has been formulated using high quality ethylene glycol couple with a low silicate additive technology to prevent corrosion and pitting caused by cavitation

IDC Heavy Duty Diesel Antifreeze is an advanced formulation for light and heavy-duty diesel engine cooling systems. It is formulated using ethylene glycol and a nitrited, low-silicate additive system to provide complete protection up to five times longer than regular antifreeze. It is blended into a 50/50 mixture with high quality water for freeze protection down to -37°C (-34°F) and boil-over protection up to 132°C (269°F).

Global Antifreeze/Coolant is a premium Organic Acid Technology (OAT) long-life antifreeze for the cooling systems of all makes and models of foreign and domestic passenger vehicles, light-duty trucks, and SUVs. This product uses exclusive corrosion inhibitors to protect all coolant system metals against rust, corrosion, and pitting caused by cavitation.

Emgard® 7668 ATF is an automatic transmission fluid used for heavy duty vehicle applications. It is formulated with advanced additives to ensure smooth transmission operation.

HD Hydraulic 10W is a heavy-duty (HD) hydraulic oil formulated with a high zinc content, dispersant, and detergent additives for heavy equipment, including Caterpillar® hydraulic systems and some hydrostatic transmissions. HD Hydraulic 10W is designed for equipment specifying Cat® HYDO^TM Advanced 10 and other manufacturers’ mobile hydraulic units.

Max1 Synthetic Blend is formulated with ultra-pure synthetic base oils to provide enhanced engine performance and trouble-free motoring.

Synthetic Compressor is manufactured from the highest quality polyalphaolefin (PAO) base-stocks and advanced additive technology. 

SYN HDH 75W-90 is a synthetic multi-weight gear oil offering a complete protection package for differentials' extreme pressure (EP) conditions, including limited slip and planetaries working under the heaviest load conditions. It meets the performance requirements of API GL-5.

Syn Gear & Bearing oils are formulated with premium additives offering outstanding EP protection and load-carrying capacity to protect gears operating in harsh conditions. These oils provide additional micropitting protection to keep bearings in optimal condition.

IDO ADVANTAGE 10W-30 SYN BLEND FA-4 is a synthetic-blend 10W-30 representing the latest technology and advancements in heavy-duty diesel engine oil.  FA-4 compliant engines were designed to run on low-viscosity oils to provide optimum fuel efficiency and environmental benefits.

IDO ADVANTAGE 10W-30 FA-4 represents the latest technology and advancements in heavy-duty diesel engine oils. FA-4 compliant engines were designed to run on low-viscosity oils to provide optimum fuel efficiency and environmental benefits.

SYN TRANS 50 is a full synthetic heavy-duty SAE 50 manual transmission oil formulated for transmissions and gear cases of off-warranty vehicles, where API GL-1 through GL-4 is recommended. 

TRANSflo TO-4 10W-40 is a premium synthetic blend transmission fluid specially formulated to meet the demanding requirements of Caterpillar’s latest performance specifications: TO-4 and TO-4M. TRANSflo TO-4 10W-40 is a multi-seasonal fluid capable of replacing TO-4 SAE 10W and 30.

TRANSflo CVT is a synthetic  transmission fluid designed for use in Continuously Variable Transmissions.  This multi-vehicle CVT fluid provides excellent anti-shudder durability and friction protection to keep your transmission running smoothly. 

Max1 Conventional Motor Oil has been formulated to meet or exceed the highest qualifications and specifications of the North American motor industry. 

Max1 Advanced 100% Synthetic exceeds the latest performance requirements of ILSAC GF-6A and ILSAC GF-6B (0W-16) and is fully approved against the latest GM dexos™1 Gen 3 specification for our 0W-20 and 5W-30 grades.

Irving Hydraulic Oils are high-performance anti-wear hydraulic oils. These oils are blended from quality paraffinic mineral oil, which gives them the ability to maintain their viscosity over a relatively wide range of operating temperatures.

PAPER MACHINE OIL is a heavy-duty oil formulated using premium paraffinic base oils, a special detergent additive package, and EP additives designed specifically for the paper making industry. 

Transformer Oil is formulated with high-quality naphthenic oils designed for use in electrical applications where ASTM D3487 Type II inhibited oils are required.

WHITE OIL is a highly refined and stable pure mineral oil used in a wide range of equipment. This formulation was designed to be tasteless, odorless, non-staining and colorless, ideal for use where it may encounter finished products.  

D&E oils are blended from high viscosity, pure paraffinic base stocks and contain very effective oxidation and corrosion inhibitors.

RR OILS are formulated to satisfy the severe lubricant requirements of today’s medium speed, high output diesel engines, such as those typically found in locomotives, generator sets and inland marine vessels.

SYN TRAX is a premium synthetic blend lubricant designed for air and liquid-cooled 2-stroke gasoline engines where a low-ash oil is recommended.

TRAX is a high-performance low-ash lubricant developed for air and liquid-cooled 2-stroke gasoline engines formulated with a pleasant vanilla scent.

2-CYCLE Plus is a premium lubricant for water-cooled outboard 2-stroke gasoline engines. This formulation was designed to ensure low carbon, ashless performance, and improved ease of mixing with gasoline. 

WEARTEX grease is a semi-fluid grease using a lithium complex thickener. It provides excellent rust protection and resistance to oxidation, giving long and durable service. WEARTEX’s semi-fluid nature allows for use in industrial gearboxes where heavy oils are otherwise required or where leaks from the housing make oils wasteful. 

LUBEX SYN are full synthetic greases containing calcium sulfonate complex thickeners and synthetic PAO base oils. LUBEX SYN will give a longer life than conventional EP greases extending the time interval before re-greasing and reducing maintenance costs.

LUBEX MP are high-quality multipurpose extreme pressure greases formulated with lithium 12 hydroxy soap thickener and mineral oil. LUBEX MP greases are versatile, making them ideal for general machinery and chassis lubrication. They can also be used on plain, antifriction, and non-disc brake wheel bearings.

LUBEX-FG is a premium multipurpose grease developed explicitly for the food industry with its non-toxic, odourless and tasteless characteristics and is NSF H1 registered. It is formulated with calcium sulfonate soap thickener, high-quality mineral oil and anti-corrosion and anti-wear properties. 

LUBEX-EP SPECIAL is a high-performance extreme pressure (EP) grease formulated with lithium complex soap thickener, mineral oil and an added polymer to improve adhesion. It’s unique anti-wear and anti-corrosion inhibitors ensure optimal performance in demanding industrial and heavy commercial applications where typical EP grease is insufficient.

LUBEX EP are premium multipurpose and extreme pressure greases developed with high-quality mineral oil and a lithium complex soap thickener. They provide top-level protection from extreme pressure (EP) load wear and damage. Lubex EP 1 and EP 2 are NLGI GC-LB certified for wheel bearing and chassis use.  

LUBEX CG are premium greases formulated with lithium 12 hydroxy soap thickener, high-quality mineral oils and enhanced adhesion and cohesion properties to resist high loads while staying in place. Their excellent adhesion properties make them suitable for applications where pressure squeeze-out can be an issue, such as pivots, hinges, knuckles and bushings. 

AF-MOLY PLUS are heavy-duty extreme pressure greases formulated with lithium complex soap thickener and high-quality mineral oil. They are fortified with 5% molybdenum disulfide (MoS₂) to provide dry film lubrication for load-bearing surfaces in applications with friction and the tendency for squeezing out. 

AF-MOLY is a heavy-duty extreme pressure grease formulated with lithium complex soap thickener, high-quality base oils and 3% molybdenum disulfide (MoS₂) developed for industrial applications and automotive chassis lubrication where the grease may tend to be squeezed out. AF-MOLY is certified by the NLGI to its top-performance chassis grease rating, LB. 

STALUBE oils are high-performance chain oils formulated especially for heavy-duty applications with chain saws and in industrial machinery where drippage is unwanted, unsightly or hazardous.

Saw Save Oils are designed for sawmills, particularly on saw blades where the water cools them. They are formulated with extreme pressure (EP), anti-wear, tackifier, and friction modifier additives that provide the proper protection for saw blades and guides, prolonging the life of components.

TRANSflo TO-4 oils are premium transmission drivetrain oils (TDTO) specially formulated to meet the requirements of Caterpillar’s latest performance specification, TO-4. Caterpillar recommends TO-4 type fluids in all new and rebuilt drivetrain components.

TRANSflo LV is a full synthetic low viscosity multi-vehicle automatic transmission fluid.

TRANSflo MV was designed to meet the performance requirements of global transmissions from North American, European and Asian transmission manufactures.

TRANSflo F is a niche ATF developed specifically to meet the needs of Ford vehicles manufactured between 1950 and 1980. It was formally approved by Ford for specifications M2C33.

TRANSflo is a premium product specially formulated for use in automatic transmissions manufactured in 2005 and earlier for General Motors, Ford, and Chrysler vehicles.

HEAT TRANSFER 200SP is specifically designed for maximum performance in closed circulating heat transfer systems equipped with an expansion tank and nitrogen blanket to prevent excessive oxidation that would otherwise occur when hot oil contacts atmospheric oxygen. 

HT 70 is formulated using pure high-quality paraffinic base oils with a good natural viscosity index (VI) with clear, light yellow colour. 

HYDRAULIC SAFETY FLUID is a non-explosive hydraulic fluid with a high degree of fire resistance, for use where there are potential sources of ignition. This fluid has been formulated to resist combustion while providing excellent wear, corrosion and rust protection.

HYDRAULIC ZF46 is a premium high-performance zinc free, inherently biodegradable hydraulic fluid, developed to perform in extreme conditions and environmentally sensitive areas.

HYDRAULIC LP oils are high-performance, multi-grade, anti-wear hydraulic oils. They offer the same wear and corrosion protection as traditional hydraulic oils, but operate over a wider range of operating temperatures.

HYDRAULIC HP PREMIUM is a high-performance, multi-grade, 100% synthetic anti-wear hydraulic fluid developed to match John Deere’s HydrauTM XR fluid. Providing extended service life and year-round performance offering advanced wear and corrosion protection.

HYDRAULIC HP is a high performance 100% synthetic anti-wear hydraulic fluid developed to provide extended service life and year-round performance offering advanced wear and corrosion protection.

BIO-HYDRAULIC 46 is a premium environmentally responsible hydraulic fluid engineered to provide exceptional performance in hydraulic and circulation systems.

Tractor Hydraulic Fluids are Universal Tractor Transmission Oils (UTTO) that are formulated for use in transmissions, final drives, power take-off, wet brakes, hydraulics, clutches, and power steering systems. Designed for use in agricultural, construction, and mining equipment that uses a common fluid reservoir.

FORM OIL CONTRACTOR acts as a form release agent with a rust preventative coating and used for the manufacture of precast concrete structures, walls, pipe, curbs and beams.

FORM OIL is a blend of quality pure paraffinic base oil and petroleum distillate and is used as a form-release agent with a rust-preventive coating.

BIO FORM OIL oils are bio based, biodegradable and water soluble. This oil has been formulated to act as an excellent lubricant while ensuring very little danger to the environment.

GEAR OIL is intended for use as heavy-duty, Extreme Pressure (EP) oil for industrial gear sets. Each grade in the series is blended from quality, high viscosity index (VI) paraffinic base oils.

Syn Gear oils are formulated with high-quality polyalphaolefin (PAO) base oils and premium additives, offering outstanding EP protection and load-carrying capacity to help protect gear surfaces operating where heavy loads and extreme pressures are present.

HDH Gear Oils are Extreme-Pressure (EP) automotive gear lubricants made from high-quality, high-viscosity index (VI) paraffinic base oils. They are recommended for light—and heavy-duty axles and non-synchronized manual transmissions. These oils are also suitable for outdoor industrial applications with enclosed gear sets that require high film strength.

Marine MTX oils are premium lubricants designed to lubricate medium-speed trunk piston diesel engines in the marine sector. These oils are blended with top-quality paraffinic base oils and carefully balanced with optimum detergency to enhance resistance against corrosion and oxidation, provide wear protection and enable water tolerance.

Marine LCX oils are premium marine cylinder oils designed for crosshead diesel engines.  These oils are blended with high-quality paraffinic base oils and a detergent system that can handle modern engines' high temperatures and pressures.

WAYLUBE uses high quality paraffinic base oils with select additives to ensure a high-performance lubricant designed for use on the slide-ways of machine tools.

SOLUBLE LIGHT #2 is a premium conventional metal-working fluid for general-purpose machining operations. It is designed to reduce heat, fight bacteria, mold and yeast extending the fluid life.

PAPER MACHINE 220SP is a heavy-duty, non-detergent, ashless circulating oil formulated with premium paraffinic base oils designed for the paper-making industry.  

ROCKDRILL oils are specially blended from quality paraffinic base oils and compounded with antirust, tackiness and extreme pressure (EP) additives designed for use in drilling applications. 

IDO Universal Synthetic 0W-30 and 5W-40 oils are blended from select synthetic base stocks with a naturally high viscosity index and a performance additive package based on API CK-4 technology. 

IDO UNIVERSAL Monograde Diesel Engine Oils are blended from select high viscosity base stocks and low-ash additives.  This formulation has added detergent to ensure engine cleanliness, minimized ring-sticking and reduced liner-scuffing.

IDO PREMIUM PLUS SYN BLEND CK-4 10W-30 next-generation oil was formulated to meet compliance levels set forth by the EPA for diesel engines manufactured in 2017 and onward. Developed as a synthetic blend, this oil provides quantifiable improvements in emissions control, wear protection, TBN retention, shear stability, fuel economy and oxidation resistance.

IDO PREMIUM PLUS CK-4 next-generation oil was formulated to meet API CK-4 specifications and compliance levels set forth by the EPA for diesel engines manufactured in 2017 and onward. It is fully backward serviceable to API CJ-4, CI-4 Plus, and CH-4.

IDO PREMIUM PLUS SYNTHETIC 0W-40 diesel motor oil combines a unique formula of Polyalphaolefin (PAO) synthetic group IV base oils together with a high-quality performance additive package.  This advanced heavy-duty diesel motor oil is specially formulated to deliver exceptional cold temperature performance for the most demanding operating conditions.

IDO PREMIUM PLUS SYNTHETIC 5W-40 CK-4 was formulated to meet API CK-4 specifications and compliance levels set forth by the EPA for diesel engines manufactured in 2017 and onward. It is compatible with exhaust after-treatment devices, including Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC), and Selective Catalytic Reduction systems (SCR).

Advant 100% synthetic passenger car motor oil offers the ultimate in lubricant protection for European gasoline and diesel powered automobiles.

Max1 Conventional Motor Oil has been formulated to exceed the performance requirements of the latest ILSAC GF-6Aspecification. The GF-6A specification defines an oil with superior oxidation resistance and fuel economy performance compared to the previous GF-5 category.