Product Category Type
Product Type

TRANSflo TO-4 - Transmission Drivetrain oils - Conventional

TRANSflo TO-4 oils are premium transmission drivetrain oils (TDTO) specially formulated to meet the requirements of Caterpillar’s latest performance specification, TO-4. Caterpillar recommends TO-4 type fluids in all new and rebuilt drivetrain components.

HT 70 - Economical Flushing/Circulating Fluid

HT 70 is formulated using pure high-quality paraffinic base oils with a good natural viscosity index (VI) with clear, light yellow colour.

Tractor Hydraulic Fluid - Universal Tractor Transmission Oil

Tractor Hydraulic Fluids are Universal Tractor Transmission Oils (UTTO) that are formulated for use in transmissions, final drives, power take-off, wet brakes, hydraulics, clutches, and power steering systems. Designed for use in agricultural, construction, and mining equipment that uses a common fluid reservoir.

HDH Gear Oil – Heavy Duty Hypoid

HDH Gear Oils are Extreme-Pressure (EP) automotive gear lubricants made from high-quality, high-viscosity index (VI) paraffinic base oils. They are recommended for light—and heavy-duty axles and non-synchronized manual transmissions. These oils are also suitable for outdoor industrial applications with enclosed gear sets that require high film strength.

D & E - Circulating and Turbine Oil

D&E oils are blended from high viscosity, pure paraffinic base stocks and contain very effective oxidation and corrosion inhibitors.

SYN TRAX - 2 Stroke Engine Oil - Synthetic Blend

SYN TRAX is a premium synthetic blend lubricant designed for air and liquid-cooled 2-stroke gasoline engines where a low-ash oil is recommended.

TRAX - Multi-Use 2-Stroke Engine Oil

TRAX is a high-performance low-ash lubricant developed for air and liquid-cooled 2-stroke gasoline engines formulated with a pleasant vanilla scent.

STALUBE - High-Performance Chain Oil

STALUBE oils are high-performance chain oils formulated especially for heavy-duty applications with chain saws and in industrial machinery where drippage is unwanted, unsightly or hazardous.

SAW SAVE - Saw Blade Oil

Saw Save Oils are designed for sawmills, particularly on saw blades where the water cools them. They are formulated with extreme pressure (EP), anti-wear, tackifier, and friction modifier additives that provide the proper protection for saw blades and guides, prolonging the life of components.

Heat Transfer - Circulating and Quench Oil

HEAT TRANSFER 200SP is specifically designed for maximum performance in closed circulating heat transfer systems equipped with an expansion tank and nitrogen blanket to prevent excessive oxidation that would otherwise occur when hot oil contacts atmospheric oxygen.